27
7
Problems
Points to be checked
After plugging the machine in the indicator for the
Start/Stop key does not light up and there is no display
on the screen.
Check the machine is correctly connected to the
electric socket.
Check that the switch, the plug and the fuse are in
good condition.
The Start/Stop key indicator light comes on but heating
does not start.
Make sure the that the pans are compliant with use
on induction hobs.
Make sure the that the pans are correctly placed on
the induction hob.
Call a help service.
After use, the machine turns off and then a ventilation
noise is heard several times
The machine will stop the ventilation when the
temperature is lower than 60 degrees; depending on
the duration of use the ventilation may operate
several times.
The machine stops heating abruptly when it is
operating.
Allow the machine to cool.
Clear the air inlet and outlet.
Adjust the timer again.
Refer to the error codes below.
Display of error
codes
E0
The machine circuits are defective
E1
The induction cooker has not detected a pan or the
pans on the induction cooker are not compatible
E2
The induction cooker has overheated
E3
The voltage is too high
E4
The voltage is too low
E5, E6
Short circuit
E1-E4
Inspect the product to resolve the problem before any
other approach
E0-E2-E5-E6
Contact Customer Service
BRANDT FRANCE– Simplified Joint Stock Company with capital of 100.000.000 Euros
89/91 Boulevard Franklin Roosevelt – 92500 Rueil-Malmaison (France)
