www.branxfitness-helpdesk.co.uk
www.branxfitness-helpdesk.co.uk
STEP 12.
OPENING YOUR ACCESSORY BOX WHICH INCLUDES:
1. 6 Training Dumbbells.
2. Dumbbell fitments and related screws
STEP 13.
ATTACHING THE DUMBELL HOLDING EQUIPMENT TO THE TREADMILL ARM, USING
THE REQUIRED 3xM4x13 SMALL SCREWS.
ONCE ALL 3 SCREWS ARE FIRMLY IN PLACE SIMPLY ATTACH YOUR TRAINING
DUMBELLS.
(THE ABOVE IS REQUIRED FOR BOTH SIDES OF THE TREADMILL)
STEP 14.
YOUR TREADMILL IS NOW READY TO BE USED. JUST ATTACH THE RED SAFETY
CHORD TO THE CONSOLE AS SHOWN AND THEN CLIP IT TO YOUR CLOTHING
INCASE YOU NEED TO PULL IT IN ORDER TO STOP THE MACHINE.
PLEASE NOTE THE MACHINE WILL STOP SUDDENLY IF THIS SAFETY CHORD IS
PULLED.
STEP 8.
SCREW INTO PLACE 1 X M8x16 SMALL SCREW WITH WASHER.
(THE ABOVE IS REQUIRED FOR BOTH SIDES OF THE TREADMILL)
STEP 9.
SCREW INTO PLACE 1 X M8x16 SMALL SCREW WITH WASHER.
(THE ABOVE IS REQUIRED FOR BOTH SIDES OF THE TREADMILL)
STEP 10.
SCREW INTO PLACE 1 X M8x16 SMALL SCREW WITH WASHER.
(THE ABOVE IS REQUIRED FOR BOTH SIDES OF THE TREADMILL)
STEP 11.
YOUR TREADMILL IS ALMOST READY FOR YOU TO USE
Page 12
Page 13
