www.branxfitness.co.uk/productsupport
www.branxfitness.co.uk/productsupport
STEP 7.
TO PUT THE SIDE COVERS INTO PLACE REMOVE THE 2 SCREWS THAT ARE
ALREADY SLIGHTLY SCREWED INTO THE TREADMILL, PLACE THE COVER INTO
ITS CORRECT POSITION AND SCREW BOTH SCREWS INTO PLACE IN ORDER TO
SECURE SAFELY THE SIDE PLASTIC COVERS.
(THE ABOVE IS REQUIRED FOR BOTH SIDES OF THE TREADMILL)
STEP 8.
YOUR TREADMILL IS NOW READY TO BE USED.
JUST ATTACH THE RED SAFETY CORD TO THE CONSOLE AS SHOWN AND THEN
CLIP IT TO YOUR CLOTHING INCASE YOU NEED TO PULL IT IN ORDER TO STOP
THE MACHINE.
PLEASE NOTE THE MACHINE WILL STOP SUDDENLY IF THIS SAFETY CORD IS
PULLED.
Page 12
HOW TO PLUG IN THE POWER CORD
When your treadmill arrives it is brand new and
ready to go. Ensure where its being used the
electrics are 100% safe and in compliance with
current regulations. If in any doubt whatsoever
contact your local fully certified and reputable
electrician.
This product must be earthed.
If it should
malfunction or break down, earthing provides
a path of least resistance for electric current to
reduce the risk of electric shock. This product
is equipped with a cord having an equipment
earthing conductor and an earthing plug.
Plug the power cord into an appropriate
outlet that is properly installed and earthed
in accordance with all local codes and
ordinances.
DANGER:
Improper
connection of the equipment-earthing
conductor can result in an increased risk
of electric shock. Check with a qualified
electrician or serviceman if you are
in doubt as to whether the product is
properly earthed. Do not modify the plug
provided with the product — if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
OPERATION AND ADJUSTMENT
Page 13
1
