15
efficiency. This section is a procedural guideline
only and is subject to the requirements of the
local Health Authorities.
2
Prior to the disassembly and cleaning, the
machine must be emptied of product.
5. 5. 1 DISMANTLING
1
Remove cover from the bowl.
2
Remove the bowl by lifting its faucet side up
and off the fastening hooks (see figure 2) and
slide it out (see figure 3).
figure 2
figure 3
3
Slide the outer spiral out (see figure 4) and
then Outside magnetic rotor assembly (see
figure 5).
figure 4
figure 5
ATTENTION
Before any disassembly and/or cleaning
procedure make sure that the dispenser is
disconnected from its power source by
unplugging it.
