22
3-5
Entering or Changing a Program
3-5.1
The GDCP-A Control Panel uses a four key keypad and a liquid crystal display to
enter or change the programming for the various functions. Please see Fig. 7,
page 21, for the location of the various front panel features. The routine
involves displaying a programming choice on the LCD and waiting for the
operator to respond by pressing one of the four keys. Depending upon the key
pressed, a parameter is entered into the program, or the next programming
choice is presented on the LCD.
To aide with the programming, a list of keys that are active for that portion
of the programming routine is presented on the fourth line of the display.
However, in most cases, the “MENU” key is also active. Pressing this key
will bring the panel back to the main display.
The functions that can be programmed by the operator are detailed below. By
pressing the keys in the noted sequence, the operator will be able to program the
panel for optimum performance.
3-5.2
Time
Press the following keys in the noted sequence to set or change the time.
Press “MENU”
Press “ENT”
Press “ENT”
Press “NEXT” until hour correct
Press “ENT”
Press “NEXT” until minute correct
Press “ENT”
Press “MENU” for main display
Check the display for the correct time.
3-5.3
Date
Press the following keys in the noted sequence to set or change the date.
Press “MENU”
Press “ENT”
Press “NEXT”
Press “ENT”
Press “NEXT” until day-of-week correct
Press “ENT”
Press “NEXT” until month correct
Press “ENT”
Press “NEXT” until day-of-month correct
Press “ENT”
Press “NEXT” until year correct
Press “ENT”
Press “MENU” for main display
Check the display for the correct date and day-of-week.
Summary of Contents for GDCP-A
Page 17: ......
