user guide
6
PHONE
Case A:
ADSL modem with built-in router
Before and AfTer setting up the
FLIP Phone
.
after
PC
Modem
Phone
Splitter
Phone Line
Phone Cable
LAN Cable
PC
Modem
Phone
Splitter
Phone Line
Phone Cable
LAN Cable
FLIP Phone
before
sETTiNG Up THE TERMiNaL
The setup will depend on the other devices already installed for the internet connection, as well as
where the provider information (PPPoe) is registered.
The PPPoe (user authentication for the internet connection) must be registered in the router or modem
(with built-in router). for the setup you need the information from the internet provider (user name and
password). If you do not have a modem/router, setup the PPPoe in the
FLIP Phone
(see page 12).
IMPORTANT:
To setup the PPPoe in the
FLIP Phone
terminal, the maximum number of characters for entering the user name
and password is 32. If that quantity is exceeded, the setup must be performed through the internet browser (see ADDeNDUM I,
page 13).
After setting up the
FLIP Phone
terminal, wait a few minutes for system to stabilize.
If the modem/router was properly setup and installed, when you plug in the
FLIP Phone
terminal, the
display will show <
Brastel-FLIP
>.
If the modem/router was properly installed but the setup was not completed, when you plug in the
FLIP
Phone
terminal, the display will show <
No service
>.
Check in what case do you fit in and setup the
FLIP Phone
as showing in the images.
