T
HERMAL
P
ROCESS
E
QUIPMENT
S
PECIALISTS
BRAUDE
UNIT 5, WELLINGTON BUSINESS PARK
CROWTHORNE, BERKS. ENGLAND RG45 6LS
A Trading Division of Heatrod Elements Ltd
Co Reg No: 766637
Tel: 01252 876123
www.braude.co.uk
sales@braude.co.uk
VAT: UK628867390
SELF PRIMING CHEMICAL
SERVICE PUMPS
INSTALLATION AND OPERATING INSTRUCTIONS
This Manual covers:
SELF PRIMING MODEL RANGE
J50ECX TO J250ECX
STAINLESS STEEL*, and NON METALLIC SEAL
IMPORTANT
ALL ELECTRICAL WORK SHOULD ONLY BE
UNDERTAKEN BY QUALIFIED ELECTRICIANS
WARNING
Before disconnecting electrical connections ensure that electricity supply is switched off and
isolated at source.
If pump has been taken out of service, ensure that the drain plug is replaced and the sealing
washer is in good condition and the unit is primed for initial start-up.
Use only BRAUDE spares available ex-stock from:
E. BRAUDE (LONDON) LIMITED.
NOTE:
NEVER WORK ON THE PUMP WITHOUT FIRST MAKING CERTAIN THAT
POWER SUPPLY IS SWITCHED OFF AND ISOLATED AT SOURCE
