Page 28
UP
Lift Operating Instructions
To Load Passenger:
1.
Load passenger onto platform
facing outward
and
lock wheel-
chair brakes
.
Note:
Roll stops
must
be
fully
unfolded
(ramp position) until the
entire wheelchair has crossed the
roll stop. See Photos K and L.
2.
Press red UP switch until platform
stops (reaches floor level). Re-
lease switch.
Handrail Switch: Slide knob out to
UP position.
Note:
Roll stops
must
be UP and
roll stop latch
must
be fully en-
gaged
before
raising platform.
Platform will raise above ground
level approximately two inches
before
latch engages
fully
.
approximately
2"
M
N
P
O
