22
E
N
G
L
I
S
H
1.1.3 Image Adjustment
You can use the Variations..., Color Balance..., and Curves and Levels...
menu items to adjust color and contrast.
The settings supplement or add to each other.
In the bottom area of the Image Adjustment window, you can save the
settings defined in the three windows to be used for other scans.
Please note that the settings will only be valid for the current slide (the one
displayed in the preview). In order to transfer the settings to other slides,
you can save and load the settings.
Note:
The Reset All button restores the settings of all three areas. In order to only
reset the changes of the current area, press the button with the green a rrow.
Press the OK button to confirm your entries and transfer the modifications to
the preview.
In case you pressed this button erroneously, activate the Image Adjustment
window again and press the Reset All button. This will restore the settings to
the original state.
The Cancel button discards your changes like the Reset All button. If your
settings were not saved they will be lost irrevocably. In addition, the window
will be closed.
Note: If you activated the Image Adjustment window using the button
the changes are applied to the active frame only.
