Downloaded from www.vandenborre.be
12
English
Oral-B
®
Triumph
®
with SmartGuide™
has
been carefully designed to offer you and your
family a unique brushing experience that is
both safe and effective. When using electrical
products, however, some basic safety
precautions should always be followed.
IMPORTANT
• The Oral-B Triumph is provided with a
SmartPlug (integrated Safety Extra Low
Voltage) power supply. Do not exchange or
manipulate any part of it, as there is a risk
of electric shock. Periodically check the
SmartPlug for damage and if the appliance is
damaged or non-functional, stop use of the
product. Take damaged units to an Oral-B
Braun Service Centre.
• This product is not intended for use by
children under age three.
• This appliance is not intended for use by
children or persons with reduced physical or
mental capabilities, unless they are supervised
by a person responsible for their safety.
• If the product is dropped, the brush head
should be replaced before the next use, even
if no damage is visible.
• Keep the SmartPlug away from water or other
liquid.
• Do not modify or repair the product. This may
cause fire, electric shock or injury. Consult
your dealer for repairs or contact an Oral-B
Braun Service Centre. Do not disassemble the
product, except when disposing of the battery.
• When taking out the battery for disposal, use
caution not to short the positive (+) and
negative (–) terminals.
• Do not touch the SmartPlug with wet hands.
This can cause electric shock.
• Use this product only for its intended use as
described in this manual. Do not use attach-
ments or chargers not recommended.
• If you are undergoing treatment for any oral
care condition, consult your dental profes-
sional prior to use.
Your Oral-B Triumph with SmartGuide uses an
interactive wireless display to help you optimize
your brushing experience.
Important
• To avoid electromagnetic interference and/or
compatibility conflicts, deactivate the radio
transmission of your toothbrush before
• Persons with pacemakers should always
d Handle
e Handle
display
f SmartPlug charger (includes charging ring
and SmartPlug)
g Base
plate
h Protective
cover
i Oral-B ProBright brush head (not with all
models)
j SmartGuide
display
unit
k Wall
mount
l Adhesive
tape
First use
Before brushing for the first time, charge your
toothbrush. Plug the SmartPlug into an electrical
outlet and place the handle (d) on the charging
ring (f), (see «Connecting and charging»).
• Your SmartGuide display comes with a
demonstration mode activated. There are two
ways to leave this mode. Either remove the
battery compartment cover on the back and
take out the batteries or leave the batteries in
and push the «set» or the «h/min» button,
located in the battery compartment. Please
note that your SmartGuide display will self-
activate this demonstration mode when you
do not use your toothbrush for 28 days. You
can avoid this self-activation by setting the
clock or synchronizing your handle.
set
h/min
set
h/min
1
2
set
h/min
set
h/min
1
2
98771715_D32_Euro.indd 12
98771715_D32_Euro.indd 12
19.02.2009 10:47:02 Uhr
19.02.2009 10:47:02 Uhr