29048
24490
Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.
WARNING
Decals and Antiskid
Decals
The lift is only as safe as
the operator. Replace any
missing, worn or illegible
decals!
Part numbers are
provided for decals. Inspect
your lift for missing, worn or
illegible decals. Call 1-800-
THE LIFT for replacements.
24069
Note:
Clean surfaces as
detailed on opposite page
before posting decals.
LIFT OPERATING
INSTRUCTIONS
WARNING
• Read manual before
operating lift.
• Load and unload on level
surface only.
• Engage vehicle parking
brake before operating lift.
• Provide adequate clearance
outside of vehicle to
accommodate lift.
• Do not operate lift if you
suspect lift damage, wear
or any abnormal condition.
• Keep operator and
bystanders clear of area
in which lift operates.
Whenever a wheelchair
passenger is on the
platform, the:
• Passenger must face
outward
• Wheelchair brakes must
be locked
• Roll stop must be up
Failure to follow these
rules may result in
serious bodily injury
and/or property damage.
TO OPEN DOOR(S)
Press OPEN switch
until door(s) are fully
open.
TO UNFOLD PLATFORM
(OUT):
Press OUT switch
until platform stops
(reaches floor level).
TO UNLOAD PASSENGER:
1. Load passenger onto
platform facing outward
and lock wheelchair
brakes.
2. Press DOWN switch
until platform stops and
roll stop unfolds fully.
3. Unlock wheelchair
brakes and unload
passenger from platform.
TO LOAD PASSENGER:
1. Load passenger onto
platform facing outward
and lock wheelchair
brakes.
2. Press UP switch until
platform stops
(reaches floor level)
.
3. Unlock wheelchair
brakes and unload
passenger from platform.
TO FOLD PLATFORM (IN):
Press IN switch until
platform stops.
TO CLOSE DOOR(S):
Press CLOSE switch
until door(s) are fully
closed.
24069
UP
DOWN
26
70
1
26701
Microswitch Adjustment Instructions
Unfold/Down (Outside) Microswitch
Turn adjustment bolt clockwise to stop
platform unfold function sooner. Turn
adjustment bolt counterclockwise to allow
platform to unfold further.
Up/Fold (Inside) Microswitch
Turn adjustment bolt counterclockwise
to stop platform raise function sooner.
Turn adjustment bolt clockwise to allow
platform to raise further.
24490
Page 31
25652
25652
S
S
WARNING
Contact The Braun
Corporation before
adjusting hydraulic
pressure relief
valve. Failure to
do so may result
in serious bodily
injury and/or
property damage.
22249
22249
WARNING
Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.
25675
25675
TM
12375
Fairfield, NJ USA
Oslo, Norway
Clearwater, FL USA
Kitchener, Ontario Can.
Huntington Beach, CA USA
Rocklea, Queensland Aust.
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT (219) 946-6153 FAX: (219) 946-4670
Parking Courtesy
Requested
S
S
12375
27146
MANUAL
OPERATION
Using hand pump handle:
TO UNFOLD PLATFORM (OUT):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke until
platform folds fully (stops).
3. Open hand pump valve (turn
counterclockwise) until platform reaches
floor level. Open 1/2 turn only.
4. Close hand pump valve (turn clockwise).
DOWN (TO LOWER):
Open hand pump valve (turn
counterclockwise). Open 1/2 turn only.
UP (TO RAISE):
1. Close hand pump valve (turn clockwise).
2. Insert handle in pump and stroke until
platform reaches floor level.
TO FOLD PLATFORM (IN):
Insert handle in pump and stroke.
Close valve before operating electric pump.
27146
O
P
E
N
C
L
O
S
E
OPEN
CLOSE
