1. Choose placement, near
the Carolift control
board. Ensure that the
Teach-in button
on the
receiver is easy to access. Mount the receiver in
step 3.
2. Connect the patch cable between Carolift and
the splitter.
3. Connect the adapter cable between the splitter
and the receiver.
4. Connect the hand control to the splitter on the
same side as the adapter cable.
5. Mount the receiver according to the illustration
using the supplied adhesive pads. In some cases
it might be necessary to drill
(5 mm)
and use the
supplied clips.
How to install the BraunAbility remote receiver
Adapter cable
Splitter
Hand control
Patch cable
Carolift control board
Adhesive pads
Teach-in
button
Receiver
