Positioning a rail mounted EasiSit
Fit and use
1. Place the EasiSit facing forwards on the rails in the desired position with
the handled plunger extended up and the anti-rattle cam in its lowered
position (rotated fully anti-clockwise Fig. 1). Use the wheels & curved ends
of the rail fitting to aid positioning and insertion into the rail.
2. Once located in the rail, rotate both plungers to coincide with the vertical
slots in the anti-rattle cam and slide the EasiSit along the rail until both
plungers drop and lock in. Rotate both plunger housing assemblies
clockwise until resistance is felt (Fig.2) EasiSit is now securely located and
rattle free, ready for use.
3. Release the EasiSit from the rail by reversing the above sequence.
Remember to use the curved rail fitting ends to locate the exact exit area
of fitting to rail. Once aligned, carefully tilt EasiSit back onto its wheels and
wheel away.
10
EasiSit
Summary of Contents for EASISIT
