BraunAbility EASISIT, User Manual

Fit and use

Positioning a bolted EasiSit

1.  For a permanent installation, the EasiSit may be bolted directly into a 

vehicle floor or into BraunAbility rail.

2.  Carefully choose a suitable wheelchair space within the vehicle for the 

EasiSit. 

Note:

 the six fixing positions through the leg feet. Ensure that there 

are no obstructions directly beneath the fixing positions such as petrol 

tanks, brake lines or anything that may be damaged when drilling and 

bolting through the floor. If necessary, relocate the Easisit to avoid potential 

problems.

3. 

When satisfied that the Easisit is correctly positioned, mark the fixing 
positions and drill through the floor using an 11 mm drill bit. A simple card 

template can be made up if required as an aid to marking and drilling the 

fixing positions.

4. 

Underfloor support is required at all bolted positions. It is recommended 

that a plate 75mmx75mmx4mm (or equivalent) is used for each bolt 
location.

5. 

Install the Easisit and securely tighten all fixings.

6.  Apply a proprietary under body sealant/paint to protect any drilled areas 

beneath the floor to preserve the vehicle’s corrosion resistance.

7.  Note

: Fixings are not supplied as different installations will require different 

lengths of bolt, under floor spreader plates and/or strengthening for 
optimum fitment.  Regardless of length, we recommend that no fewer 

than six bolts are used at a minimum grade of 10.9 along with nylock or 
similar shake-proof nuts.

12

EasiSit