•
Any restraints which have been subjected to a crash situation from which the vehicle must
be towed, should, in the interest of safety, be replaced.
•
Do not attempt to modify the equipment. For further advice on the installation and use of
these restraints please contact BraunAbility. Please read this manual fully before use.
•
Avoid contact with corrosive liquids. Care should be taken to prevent contamination of the
webbing with polishes, oils and chemicals.
•
The tie-down anchorages should be installed by an experienced technician/vehicle
converter. Anchorages should not be installed into unsound materials such as corroded
metal, wood, plastic and fibre glass panels, without additional and suitable reinforcement.
•
The equipment has been tested in a configuration similar to that recommended by
BraunAbility and any deviation from the recommendations here is the responsibility of the
installer/user.
7
EasiSit
EN
Sa
fe
ty
in
for
m
at
ion
Summary of Contents for EASISIT
