background image

Page 49

BraunAbility

® 

Limited Warranty

Since Braun does not control the scheduling of service work at the independent dealerships you may en-

counter some delay in scheduling or completion of work.  If you need assistance you may contact Braun, at 

631 West 11th Street, Winamac, Indiana 46996; 1-800-THE-LIFT, (843-5438).  

If two (2) or more service attempts have been made to correct any covered defect that you believe impairs 

the value, use or safety of the product, or if it has taken longer than thirty (30) days for repairs to be com-

pleted, you must, to the extent permitted by law, notify Braun directly, in writing, at the above address, of 

the unsuccessful repair(s) of the alleged defect(s) so that Braun can become directly involved in providing 

service pursuant to the terms of this limited warranty.  

WHAT IS NOT COVERED

This Limited Warranty does not cover any of the following: defects in materials, components or parts of 

the product not attributable to Braun, any material, component or part of the product that is warranted by 

another entity (Note:  the written warranty provided by the manufacturer of the material, component or part 

is the direct responsibility of that manufacturer); items that are added or changed after the product leaves 

Braun’s possession; additional items installed at any dealership, or other place of business, or by any other 

party, other than Braun; normal wear, tear, usage, maintenance, service, periodic adjustments, the effects 

of condensation or moisture from condensation; mold or any damage caused by mold; imperfections that do 

not affect the product for its intended purpose; items that are working as designed but that you are unhappy 

with; problems related to misuse, mishandling, neglect or abuse, including failure to maintain the product in 

accordance with the owner’s manual, or other routine maintenance such as inspections, lubricating, adjust

-

ments, tightening of screws, sealing, wheel alignments or rotating tires; damage due to accident or collision,

Summary of Contents for Under-Vehicle Lift NUSP34S31X48RWO

























































Reviews: