9 Operating Instructions IQ-ONE / IQ-ONE+
Bräuniger GmbH
Option-Mode ALT2
Further long pressure on the Set-Mode key brings the
instrument into Option-Mode.
Option 1 Unit
The units of height to be displayed are set here.
Option 2 Rel
Relative height, ALT2 only
For the ALT2 value, relative or absolute values can be
chosen.
If you would like to see height in meters and feet, change the
display to absolute. In Run-Mode ALT1 and ALT2 are of
equal size. You can set one of the values to feet.
TIP:
To view your current altitude in both meters and feet,
change this option to
ABS
and set the units fo
r
ALT2
to
m
. In
Run-Mode you can now toggle between
ALT1
and
ALT2
.
IMPORTANT:
If you have chosen Abs for
ALT2
in Option Mode,
ALT1 and
ALT2 are linked together.
This means that there is
only
one
Set-Mode
for ALT1 and ALT2.
Option-Mode remains
separate.
To leave this mode, change the setting „Rel“ ALT2 in Option
Mode to „Abs“. To call up ALT2 in Option- Mode you have to
switch, in Run-Mode, to ALT2 and long press the ALT1/ALT2
key twice.
3s
