USER MANUAL
9
1.8.
Installation
Before installation, please check the parts and make sure whether the
power supply voltage accords with the nameplate.
1. Install Handle Bracket assembly to the unit
Screw off the Nut
①
of the unit, install bracket assembly on the screw
and screw down the Nut.
2. Install Feeder tube assembly
There are two types of feeder tube assembly optional: Length of 0.46m
(Short Tube) and Length of 0.8m (Long Tube). Installation and operation
have a little difference.
Installation of Short Tube:
Screw off the black nipple of handle assembly, install the handle into the
connector and screw on the black nipple again. Unscrew the fixing screw
of feeder tube head on the top cover of unit, insert feeder tube head
⑰
and then tighten the screw.
Installation of Long Tube:
Screw off the black nipple of handle assembly, install the handle into the
connector and screw on the black nipple again. Unscrew the fixing screw
of feeder tube head on the top cover of unit, insert feeder tube head
⑰
and then tighten the screw. Finally, insert plug
⑯
into socket behind the
unit.
3. Install pedal switch
Put the plug of Pedal switch into pin-2 socket behind the unit.
Summary of Contents for QU376D
Page 18: ...BEDIENUNGSANLEITUNG 15...
