USER MANUAL
19
6.
If the display window shows
, this indicates the password of
input is
Input New Password
1.
When display window is showing
, press”*” button, and shows
, It indicates the unit comes into inputting new password state.
Pressing“
▲
”or“
▼
”button will change displayed value. See “set
temperature normally”.
Repeat the new password
2.
When three digits are selected, press”*” button, the display window
shows
again. Now must input the new password. Repeat the
same steps.
3.
If the password is the same as last time, the changed password is
OK. The new password is stored into the internal memory.
4.
If the password is not the same as last time, and the display window
shows
, the station will need to rewrite new password. (See the
last 8-9 step). The changing of password is finished until the lately
two passwords are identical.
NOTE: The word of password is from 0 to 9, ten words. If not, the
changed password is unsuccessful.
1.12.
Working Mode
The unit is design with many working modes. When the unit leave
factory, working mode is set as seven mode. User don’t change this
working mode optionally during using.
Summary of Contents for QU376D
Page 18: ...BEDIENUNGSANLEITUNG 15...
