Turn the system on, touch the icon to turn on the function of keeping the speed of the air pump; the air pump will run at its maximum
power and the white backlight of the icon will be lit; touch the icon again to turn on the function of regulating the speed of the air pump
and the orange backlight the function of regulating the speed of the air pump and the orange backlight of the icon will be lit; touch the icon
for the third time to turn off the function of air pump, then the backlight of the icon will be turned off. During the process of turning the air pump
on, the function of air pump can be shifted between speed maintaining and regulating, by touching and keeping the icon for one second.
Automatic drainage: Turn the system off, the orange backlight of the air pump icon will be lit by touching and keeping the icon for one
second, the air pump will work at its maximum power for three minutes.
Switch the power on, touch the icon on the panel to turn the system on.Then the orange backlight of the power icon and the white
backlight of the lamp icon will be lit. The light of the nozzle is shining white. Touching the icon again or turning time out, all the functions
and button backlight will be turned off. Operation timing: The default setting time of the system is 20 minutes. The system turns off, by touching
and keeping the icon for one second, the backlight of the air pump icon and lamp icon will be lit simultaneously and the timing will be
cancelled; touch the icon again, the orange backlight will be lit simultaneously, and the timing is set. The settings become valid when you
restart the machine.
E
OPERATION INSTRUCTIONS
Attentions at installation of electrical appliances
(1) Professional help from electrician is required to connect power cord of air pump with reference to standards.
(2) Exclusive power source for bathtub must have protective device of creepage,overload and short circuit installed and checked frequently.
(3) Earth wire must be earthed.
(4) Power source must close to electric motors, NO temporary extended socket is allowed to use.
3
(1) Power On/Off
(2) Backup Heating Function
Turn the system on, touch the icon to start the function of backup heating, then the orange backlight of the icon will be lit; touch
the icon again,the function of backup heating and the backlight of the icon will be turned off.
(3) Air Bubble Massage
(4) Lamp
Turn the system on, touch the icon to turn on the manual function of 12-color lamp conversion. Touch the icon each time, the lamp will be
changed into a different color and the white light of lamp icon will be lit.Touch and keep the icon for one second to turn on the lamp
function of automatic color conversion and the orange backlight of the lamp icon will be lit.
AC_N IN
AC_N IN
GND
3
2
1
4
1
2
3
4
CONTROLLER WIRING DIAGRAM
INPUT VOLTAGE:
INPUT CURRENT:
MAX POWER:
WATERPROOF:
MODEL:
220-240VAC 50/60Hz
4.35A
1000W
IPX5
BTU2.0
CONTROL FANEL
FUSE
FUSE:
T1AL 250VAC 5 20MM
*
Voltage danger!!!
Heater N
Heater L
TRANSFORMER
RGB lamp N
RGB lamp L
Air pump N
Air pump L
Slgnal control
el
zz
on
b
g
R
xo
b l
ort
no
c
clr
tc
el
e
p
mal
B
G
R
RGB lamp
3W 8
POWER CABLE
220V-240~
(Optlonal)
N
L
G
AC INPUT
220-240VAC 50/60Hz
HEATER
AIR PUMP
TECHNIQUES AND PARAMETERS ARE SUBJECTTO CHANGE WITHOUT NOTICE
Be use for equipment RGB nozzle
Power On/Off
Function Key of Backup Heating
Function Key of Air Pump
Function Key of Lighting
Electric
Connection Blueprint
