FAUCET AND POP-UP OPERATION
E
F
MAINTENANCE
CAUTION: Always turn water OFF before removing existing or
disassembing the faucet. Open faucet handles to
relieve water pressure and insure that complete water
shut-off has been accomplished.
To keep the surface clean and bright, please clean
the faucet regularly,please abide by the following
procedures:
1. Use rinsing water and soft cloth, clean bilge and bilge
membrane on the surface to the best of the abilities.
2. Cleaned the residua with the following cleansers only.
Soft liquid cleanser.
Colorless glass cleanser, totally soluble powder cleanser
without abrasive capability.(Mixed by instructions.)
No abrasive cleansers waxes
Never use cleanser, emery cloth or handkerchief which can
rub.
Never use cleaners containing abrasive cleansers,
ammonia,bleach, acids, waxes, alcohol, solvents or other
products not recommended for chrome.
3. After cleaning, use rinsing water to clean all cleanser
immediately and drying with a soft cotton cloth.
4. Carefully dismantle the aerator regularly, rinse under clean
running water until any loose debris is cleared to avoid the
influence to water outflow.
Open
Close
(Hot)
(Cold)
1.Pull Right Handle to turn on water, and down
to turn off.
2.Turn Handle towards side with red mark to
adjust hot water volume, and towards side
with blue mark to adjust cold water.
GF4354/A1/20110726
Service Hot Line
8008205330
Guangzhou bathone industrial Co., Ltd.
