Before loading and operating the log split-
ter, always wear protective gear such as
safety goggles, face shield, hearing pro-
tection, tight-fitting gloves without draw
strings or loose cuffs, and steel-toed
shoes.
4. Operating the log splitter in a horizontal
position.
Use the following photos for the correct
and incorrect methods of splitting logs.
Never split a log using an incorrect or
unsafe method.
a. Place the log on the log splitter. Grasp
the log on the sides near the middle of
the block. Center the log, side-to-side,
on the rail of the log splitter making
sure that the sawed end is against the
large plate (base plate) at the opposite
end from the hydraulic control valve
control lever.
Do not place your hands on the
ends of the log when loading the
log splitter. This is a very
UNSAFE method and could result in injury
to your hands.
CAUTION
WARNING
815-672-8861
21
Brave Products, Inc.
5. Operating the log splitter in a vertical
position.
Use the following photos for the correct
and incorrect methods of splitting logs.
Never split a log using an incorrect or
unsafe method.
Before loading and operating the log split-
ter, always wear protective gear such as
safety goggles, face shield, hearing pro-
tection, tight-fitting gloves without draw
strings or loose cuffs, and steel-toed
shoes.
a. To operate the log splitter in a vertical
position, remove the hair pin clip and
clevis pin.
b. Block the wheels and stand the rail
assembly up into a vertical position.
WARNING
Brave Products, Inc.
24
815-672-8861
Summary of Contents for VH9934
Page 2: ......
