Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories
.
WARNING: USE EXTREME
CAUTION WHEN HANDLING THE
BLADES. THEY ARE EXTREMELY
SHARP. Always remove protective
bade cover(s) before using.
The double chopping
blade may be
used with one
blade or with
two blades.
1. To use as
a double
blade, carefully
slip the separate
blade over the
shaft of the
main blade.
(Fig. 3 & Fig. 4)
4
OPERATING INSTRUCTIONS
Speed Control Dial
The food processor speed control dial
has two speeds settings plus "Pulse" and
"Turbo".
1 - Low
2 - High
The speed can be adjusted while the
food processor is in use.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse" when
the unit is in the "Off" position. Use
"Turbo" when the unit is in the "On"
position and you need a burst of power.
Please note that the "Pulse" and "Turbo"
is only intended to be used for short
"bursts" of processing.
Operating the Food Processor
Setting up:
1.
CAUTION
: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 1)
3. When fitted correctly, the handle will
be to the right of the assembly, and
the ridge on the base of the bowl will
fit into the slot at the back of the
processor body. (Fig. 2)
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
Main Blade
Double
Blade
Two Blades Together
4. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Fig. 1
Fig. 3
Fig. 4
Fig. 5
Fig. 2
Slicing & Shredding Blades
CAUTION: Make sure that the unit
is unplugged from the power
source and the speed control dial is in
the “OFF” position before inserting or
removing attachments.
1.
Place the blade of your choice on
the blade holder. Inserting the longer
tab on the side of the blade first.
(Fig. 14)
2.
Press the other end of the blade until
it clicks into place. (Fig. 15)
3.
Fit the processor bowl and spindle
as detailed on the page 4.
4.
Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 16)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP
.
5.
Fit the lid and click into place as
described in the Setting Up section
(page 4).
6.
Plug in the processor.
WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO
THE PROCESSOR BOWL
THROUGH THE FEEDER TUBE.
Do not overload the food processor bowl.
In one operation, you can process a
maximum of 6 cups (1500 ml) of food.
Fig. 14
Fig. 15
Fig. 16
4.
Insert the juice
reamer into the
center of the citrus
juice filter with its
shaft inside the
central column of
the bowl. (Fig. 13)
5.
Plug in the appliance.
6.
Place fruit on juice
reamer and hold with
a cupped hand.
7.
Operate at minimum speed.
WARNING: Always operate the
juicer at minimum speed only.
Do not operate the citrus juicer at
higher speeds.
Fig. 13
OPERATING INSTRUCTIONS
Citrus Juice Filter (cont.)
French Fry Blade Assembly
CAUTION: Make sure that the unit
is unplugged from the power
source and the speed control dial is in
the “OFF” position before inserting or
removing attachments.
Note: The French Fry Blade is already
assembled to the blade holder. Do not
try to remove it.
(Fig. 17)
1.
Fit the processor bowl and spindle
as detailed previously.
2.
Using the finger holes in the French
Fry blade holder, fit it over the
spindle and press firmly into place as
indicated. (Fig. 18)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP
.
4.
Fit the lid and click into place as
indicated in Setting Up section
(page 4).
5.
Plug in the processor.
WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH
THE FEEDER TUBE.
Do not overload the bowl. In one
operation, you can process a
maximum 6 cups (1500 ml) of food.
Fig. 17
Fig. 18
7
