GB
version
1.0
E
Copyright Bravilor Bonamat B.V.
VIII
Safety devices present
The machine is default provided with the following safety devices:
– Using the ON/OFF–switch the machine is switched on or off. After switching off there is still some
residual voltage in the electrical system. Remove the plug from the wall outlet in order to take away
this residual voltage.
– Electrical fuse of electronic components that is activated as soon as the power drop exceeds the
allowed maximum value due to a power failure.
– Thermal safety device that interrupts the power when the water temperature in the boiler becomes
too high.
– Boiling protection that interrupts the power when the boiler temperature becomes too high.
– Overflow protection that prevents the machine from taking in more water than allowed.
– Emergency stop to interrupt a selection of the amount of fluid (cup, half a can or whole can). The
cycle started last is finished.
– Drip–tray with float indication and discharge possibilities to prevent trouble caused by spilled drink.
– Automatic stop function when the filter paper is finished.
– Automatic stop function (counter) when the litterbin is full.
– Automatic stop function when there is a leakage in the machine or when boiling over.
Machines and the environment
Packaging material
The main components of the packaging material for transport and protection of the machine are the
following:
– Corrugated board
– Polystyrene elements
Generally, the packaging material can be returned through your dealer after installation of the machine.
If this is not be possible, ask your local authority refuse department how you can dispose of the
materials.
Disposal of the machine
Machines that you wish to dispose of can usually after consultation be returned to your dealer. If this is
not possible, inquire with your local authority about the possibilities for re–use or
environmentally–friendly processing of the materials. All plastic parts have been clearly coded for this
purpose. The printed–circuit board in the machine and the components connected to this should be
consigned to electrical or electronic refuse.
