GB
version
1.0
E
Copyright Bravilor Bonamat B.V.
5
3.3
Initial use
CAUTION!
– Inspect the machine before use and check for
damages.
– Protect the machine against water and moist.
Do not wet the machine by spraying and
never submerge it in water.
– Keep the operating controls free from dirt and
grease.
– Note that during use some parts of the
machine become very hot.
At coming into operation the machine has the
default factory settings. If required, these settings
can be adjusted (chapter 6.).
3.3.1
Coffee system
D
Place an empty cup under the Coffee outlet
(7.).
D
Press the Selection button (5.1, fig.2 ) ‘regular
coffee’.
– The selection is confirmed by a beep. Only
the dot on the display at the selected drink
remains after which the drinks flows into the
cup. During the filling the cup on the display
flashes and the tapping cycle is displayed by
a circle building up with segments.
D
Throw away the content of the first two cups.
D
Check for the 3
rd
cup whether the taste and
the amount are right. If so, the system is ready
for use. If not, correct the taste and/or amount
(§6.2).
3.3.2
Hot water system
D
Place an empty cup under the hot water outlet
(6.).
D
Press the Selection button (5.5, fig.2 ) ‘hot
water’.
– The selection made is confirmed by a beep.
Only the dot on the display at the selected
drink remains after which the water flows
into the cup. During the filling the cup on the
display flashes and the tapping cycle is
displayed by a circle building up with
segments.
The system is now ready for use.
