BRAYER BR1005BK, Instruction Manual

6

7

en

en

•  Keep the unit out of reach of children and disabled

•  persons.

ELECTRIC KETTLE IS INTENDED FOR HOUSEHOLD 

USE ONLY, DO NOT USE THE KETTLE FOR 

INDUSTRIAL OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low 

temperature, it is necessary to keep it for at least 

three hours at room temperature.

•  Unpack the kettle and remove all the packaging 

materials. 

•  Keep the original package.

•  Check the delivery set.

•  Read the safety measures and operating 

recommendations.

•  Examine the kettle for damages, in case of damage 

do not plug it into the mains.

•  Make sure that the specifications of power supply 

voltage specified on the lower panel of the unit or 

the base correspond to the specifications of your 

mains. When using the kettle in the mains with 60 

Hz frequency, the unit does not need any additional 

measures.

•  Wipe the outer surface of the flask (1) with a clean, 

slightly damp cloth to remove dust. 

ATTENTION! 

To avoid burns by hot steam, do not bend over the 

spout (2).

•  Place the base (9) of the kettle on a solid steady 

flat and non-slip non-metal surface away from heat 

sources as far as possible from the edge of the 

surface. 

•  Do not place and do not use the kettle in closed 

space, for example, in the cupboard or in closed 

structures – this can lead to its breakage, cause 

harm to the user or damage to his/her property.

•  Wash the kettle flask (1) with neutral detergents, 

rinse and dry. Wipe the outer surface of the flask (1) 

with a slightly damp cloth and then wipe it dry. Do not 

use abrasives or coarse scourers for this.

•  Before connecting the kettle, make sure that there 

are no moisture drops on the flask (1), the power 

cord and the power plug.

•  Make sure that the kettle is switched off, the ON/OFF 

button (7) is set to the position «0».

•  To fill the kettle with water, take it off the base (9), 

press the lid (3) opening button (4).

•  Fill the kettle with water up to the mark «MAX» on the 

water level scale (6).

•  Close the lid (3), make sure that the lid (3) is closed 

tightly.

•  Set the kettle filled with water on the base (9).

•  Insert the power plug into the mains socket.

•  To switch the kettle on, set the ON/OFF button (7) to 

the position «I», the ON/OFF button (7) indicator will 

light up.

•  Once water starts boiling, the kettle will be switched 

off automatically and the indicator in the ON/OFF 

button (7) will go out. Pour out water and repeat the 

water boiling procedure several times.

•  Hot water resulting from the first boilings is not 

recommended to consume, you may use it for 

domestic needs.

USING THE ELECTRIC KETTLE

•  Place the base (9) of the kettle on a solid steady 

flat and non-slip non-metal surface away from heat 

sources as far as possible from the edge of the 

surface. 

•  Ensure that the ON/OFF button (7) is always 

accessible and is not blocked by foreign objects.

•  Make sure that the kettle is switched off, the ON/OFF 

button (7) is set to the position «0».

•  To fill the kettle with water, take it off the base (9), 

press the lid (3) opening button (4).

•  Fill the kettle with water not exceeding the maximal 

mark «MAX» on the water level scale (6).

•  Close the lid (3) and put the full kettle on the base 

(9).

•  Insert the power plug into the mains socket.

•  To switch the kettle on, set the ON/OFF button (7) to 

the position «I», the ON/OFF button (7) indicator will 

light up.

•  The kettle flask (1) is equipped with the thermometer 

(8) which scale shows the water temperature.

•  Once water starts boiling, the kettle will be switched 

off automatically and the indicator in the ON/OFF 

button (7) will go out.

•  Before removing the kettle from the base (9), make 

sure that the kettle is switched off, the ON/OFF 

button (7) is in the position «0».

•  After switching the kettle off, wait for 15-20 seconds, 

then you can switch it on again for re-boiling.

•  If you need to switch the kettle off, set the power 

switch (7) to the position «0».

•  If you accidentally switched the kettle on, but the 

water level appeared to be below the minimal mark, 

the automatic thermal switch will be on and the kettle 

will switch off.

•  Unplug the kettle and let it cool down for 10-15 

minutes, then fill the kettle with water and switch it 

on, the kettle will operate in normal mode.

CLEANING AND MAINTENANCE

•  Before cleaning unplug the kettle, pour out water and 

let the kettle cool down.