10
EN
water leaves the water tank (10).
•
Place the iron on its base (9) and let the soleplate
(11) cool down completely.
•
After the soleplate (11) cools down, wipe it with a dry
cloth.
•
Before taking the iron away for storage make
sure that the water tank (10) is empty, andthe iron
soleplate (11) is dry.
CLEANING AND MAINTENANCE
•
Before cleaning make sure that the iron is switched
off and cold and the power plug is not connected to
the mains socket.
•
Wipe the iron body with a slightly damp cloth and
then wipe it dry.
•
You can remove the mineral deposit from the iron
soleplate (11) with a cloth soaked in table vinegar.
•
After removing the mineral deposit polish the
soleplate (11) surface with a dry clean cloth.
•
Do not use abrasives or solvents to clean the iron
soleplate (11) and body.
•
Avoid contact of the iron soleplate (11) with sharp
metal objects, as well as with metal buttons, zippers
etc.
•
Do not immerse the iron, the power cord and the
power plug into water or any other liquids.
STORAGE
•
Before taking the iron away for storage drain the
remaining water from the water tank (10) and clean
the iron.
•
Set the temperature control knob (12) to the position
«MIN» and switch the continuous steam supply knob
(5) to the position « » (the steam supply is off).
•
Wind the power cord around the base (9).
•
Store the iron vertically in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
•
Power supply: 220-240 V, ~ 50/60 Hz
•
Rated input power: 2400 W
•
Water tank capacity: 360 ml
•
Steam release: 140 g/min
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after
expiration of the service life of the unit or
the batteries (if included), do not discard
them with usual household waste, take the
unit and the batteries to specialized stations for further
