background image

28

TROUBLE SHOOTING   

(CONTINUED)

Symptom

The bread didn’t
rise at all

The dough looks
like batter, or the
dough ball is still
sticky, not smooth
and round

The dough ball is
lumpy or too dry

Possible Solutions

Make sure yeast is not left out. Also check the date code
on the yeast and that it is always the last ingredient put
into the Pan. Make sure the yeast doesn’t come into
contact with salt or any liquid ingredients.

During the Kneading process, add 1 tablespoon of flour at a
time, letting it mix in well. For most breads, your dough ball
should become round, smooth, not sticky to the touch, and
should bounce back when you press it with your finger.

During the Kneading process, add 1 tablespoon of water at a
time, letting it mix in well.

The bread caved in

Make sure liquids are measured correctly. Next time,
reduce your liquids by 2 tablespoons. If you’re using fruits
or vegetables, make sure they are well drained.

:END: displays

The Baking Cycle is completed.

1

IMPORTANT SAFEGUARDS

WHEN USING THE BREADMAN

®

COOL

TOUCH AUTOMATIC BREAD BAKER, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, PARTICULARLY THE
FOLLOWING:

1.

READ ALL INSTRUCTIONS BEFORE USE.

2. Do not touch hot surfaces. Use handles

or knobs. Always use oven mitts when
handling hot materials and allow metal
parts to cool before cleaning.

3. Unplug this product from wall outlet

when not in use and before cleaning.
Allow to cool thoroughly before putting
on or taking off parts.

4. Do not immerse appliance in water or

any other liquid.

5. Close supervision is always necessary

when this or any appliance is used by
or near children.

6. Do not allow anything to rest on the

power cord. Do not plug in cord where
persons may walk or trip on it.

7. Do not operate this or any appliance

with a frayed or damaged cord, or after
the appliance malfunctions, or has been
damaged in any manner. Return the
appliance to Salton, Inc. for
examination and repair.

8. Avoid contact with any moving parts.

9. Do not use attachments not

recommended by Breadman

®

Products; they may damage the
appliance or cause injury.

10. This appliance is intended for

household use only. Do not use
outdoors or for commercial purposes.

11. Do not let the cord hang over the edge

of a table or counter, or touch hot
surfaces. Do not place on an unsteady
or cloth-covered surface.

12. Do not place the appliance near a hot

gas or electric burner, in a heated oven.

13. Keep the unit at least 2 inches away

from walls or any other objects when
using it.

14. To disconnect, grip the plug and pull

the plug from the wall outlet. Never pull
on the cord.

SAVE THESE INSTRUCTIONS

NOTE:

A. A short power-supply cord is provided

to reduce the risk of becoming
entangled in or tripping over a 
longer cord.

B. Extension cords are available and may

be used, but special care must be
exercised in use.

C. If an extension cord is used:

(1) the marked electrical rating of the

extension cord should be at least
as great as the electrical rating of
the appliance, and 

(2) the cord should be arranged so

that it will not drape over the
counter top or tabletop where it
can be pulled on by children or
tripped over unintentionally.

CAUTION:

During use, the internal parts of

the Breadman

®

Ultimate™  and the area

around the Steam Vent are 

HOT

Keep out of reach of children to avoid
possible injury.

TR555LC_IB_New_31-12-02  31/12/02 11:33 AM  Page 5

Summary of Contents for Cool Touch TR555LC

















Reviews: