Resetting the
Custom Program &
Personal Recipe
Memory
35
ADVANCED BAKING TECHNIQUES: CUSTOM PROGRAM
The most versatile function on the Breadman
®
Ultimate™
,
Custom Program
is similar to
Personal Recipe
in that you can
manually change the length of each process of the Bread Maker’s pre-
programmed Cycles.
Unlike
Personal Recipe,
the
Custom Program
factors in 1, 1.5, or
2 LB. loaf size and light, medium or dark crust control.
To manually change a pre-programmed Cycle, follow the guidelines
below and you’ll experience the ability to truly regulate a program to
bake your breads, your way.
You can also use
Custom Program
to change kneading and bake
times in Batter Breads™; heat and stir times in Jam; knead and rise
times in Dough.
Again, use the
and
arrows to increase or decrease the times and
temperature.
To use
Custom Program:
1. Press SELECT until you reach your preset Cycle, such as White.
2. Press PROGRAM TIME/TEMP.
A beep will sound.
CUSTOM PROGRAM
will appear in the
upper left corner of the Display Window.
3. Following the instructions from Personal Recipe, enter or change
the times as outlined. You can use the KNEADING AND
BAKING CYCLES chart in this Instruction Manual as a
reference.
4. When you are finished, a final beep will sound. Your Custom
(manual) Program changes have been made.
To reset the Breadman® Ultimate™’s memory to its original process
times, in
Personal Recipe
or
Custom Program,
press
SELECT
until
the Cycle to be changed is in the Display Window. Then press
SAVE/ERASE
. The Display Window will prompt
ERASE
. Signal your
choice by pressing
YES
.
A beep will sound and the Display Window will return to the pre-
programmed
Custom Program
or
Personal Recipe
Cycle times.
TR2200C 11/17/03 12:30 PM Page 41