4
1. Unpack and clean your Breadman® Ultimate™ Automatic Bread
Maker; see CLEANING INSTRUCTIONS. When the Breadman®
Ultimate™ is packaged for shipment, a clear plastic film is placed
over the Control Panel; carefully peel it off.
2. Place the Breadman® Ultimate™ on a dry, stable surface away from
heat and away from areas where cooking grease or water may splatter
onto it. Avoid placing the Bread Maker where it may tip over during
use. Place away from edge of the counter top.
3. The Breadman® Ultimate™ will bake up to a 2 pound loaf of bread.
Do not put a larger quantity of ingredients into the Bread Pan than
recommended. If you do so, the bread may not mix or bake correctly
and the Breadman® Ultimate™ may be damaged. The maximum
amount of ingredients to be used is as follows.
• Bread Cycles
4 to 4-2/3 cups
• Batter Breads™ and
prepackaged cake mixes
4 cups
• Dough Cycles
4-2/3 cups
• Jam
3 cups fruit
4. Before first use, operate the Breadman® Ultimate™ empty on the
Rapid White Cycle program to burn off the manufacturing oils.
Follow the instructions outlined in the MAKING DOUGH AND
BAKING BREAD section of this Instruction Manual.
NOTE: During first use, this product may smoke and/or emit an odor
from mineral oils used in manufacturing. This is normal for a
newly manufactured appliance.
1. Remember to insert the Kneading Paddle first, then add all your
ingredients BEFORE inserting the Bread Pan into the Baking
Chamber of your Breadman® Ultimate™.
2. To insert the Bread Pan in the Breadman®, seat it firmly in place.
3. To remove the Bread Pan from the Baking Chamber, hold the
Handle with an oven mitt and lift gently. When you remove the
Bread Pan after baking, BE SURE TO WEAR OVEN MITTS to
prevent burning. After you remove the loaf (by turning the Bread
Pan upside down and shaking gently), check to see that the
Kneading Paddle is removed from the loaf. If it is stuck in your
bread, use a non-metal utensil to gently remove it, taking care
not to scratch the Kneading Paddle.
BEFORE USING FOR THE FIRST TIME
Inserting and
Removing the
Bread Pan
BREADMAN® ULTIMATE™ TIPS
PLEASE NOTE:
If, at any time during the bread making process, you need to turn the
Breadman® OFF, press the
PAUSE
Button. Then press
STOP/RESET
.
TR2200C 11/17/03 12:30 PM Page 10