22
9 DECLARATION OF INCORPORATION OF PARTLY
COMPLETED MACHINERY
We,
Watson Marlow Bredel B.V. herewith declare, on our own responsibility, that the following partly
completed machinery
description:
Pulsation damper for hose pumps
type/model
PD/40, PD/65 and PD/100
serial number(s):_______________________________________
to which this declaration applies, complies with the essential requirements of:
the European pressure equipment directive 2014/68/EU (PED).
the European machine directive 2006/42/EC, annex II.1.B
The following essential requirements of Annex 1 are applied and fulfilled:
1.1.2, 1.1.5, 1.3.1, 1.3.2, 1.3.4, 1.3.6, 1.5.2, 1.5.7, 1.5.9, 1.5.13, 1.6.1, 1.6.2, 1.6.5,
1.7.1, 1.7.1.1, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3.
The products as mentioned above comply to fluid classification group I (dangerous fluids) and were
subjected to the conformity assessment procedure as mentioned in the table below. Type
examination (module B) has been in conformity with AD 2000 Edition 2002.
Type
M odule(s)
Cat.
PD/40
A2
II
PD/65
B + C2
III
PD/100
B + C2
III
The monitoring of the products is performed by Lloyd
’s Register Verification, London, United
Kingdom
. Lloyd’s Register is a registered body notified under directive 2014/68/EU Pressure
Equipment under identification number: 0343.
The monitori
ng of the manufacturer’s quality assurance system is performed by BSI Group
Netherlands, located in Amsterdam, the Netherlands.
When this pulsation damper is to be installed into a machine or is to be assembled with other
machines for installations, it is not be put into service until the relevant machinery has been declared
in conformity with these guidelines.
J. van den Heuvel,
Managing Director
Delden, January 2020
Watson-Marlow Bredel B.V.
Sluisstraat 7, 7491GA Delden, The Netherlands,
