B
REEZE
P
LAYER
I
NSTALLATION
G
UIDE
(
BRZ2-301
)
4
Copyright © 2016 Keywest Technology, Inc. All Rights Reserved
14563 W 96th Terrace • Lenexa KS 66215 USA • Need Support? Mailto:Support@keywesttechnology.com
HARDWARE
P
LAYER
A
CCESSORIES
Your
Breeze
Player
includes the following accessories:
12V power supply (1)
Wireless antenna (1)
HDMI® Cables (2)
Mounting kit (1)
If the player equipment that you received did not include all of the accessories, please notify the
Keywest
Technology
Technical
Support
department.
INSTALL A BREEZE PLAYER
The player requires three connections to function at the most basic level: Internet, video signal, and power.
B
ASIC
C
ONNECTIONS
1.
Ethernet:
a.
Connect an Ethernet cable to the Ethernet port labeled
LAN
( ) on the
Breeze
Player
.
2.
Video Output:
a.
Connect the HDMI cable to
HDMI OUT
( ) on the
Breeze
Player
.
b.
Connect the other end of the HDMI cable to the monitor, television screen, or video
distribution system.
3.
Power:
a.
Plug the power cord into to the 12V power supply and the electrical outlet.
b.
Plug the 12V power supply into the
Breeze
Player
( ).
Please refer to the
Wireless Connection
section on page 11 to utilize a wireless network connection instead of
an Ethernet cable.
Note
: Typically a wired network connection is more reliable and higher speed than a wireless connection.
HDMI Cable
