Appendix A. Radio Signal Propagation
User's Manual
A-4
BreezeNET DS.11
The first time each station on the SA-DS.11’s LAN sends a message, the station’s
address is registered in the SA-DS.11 and the AP-DS.11. The SA-DS.11 and AP-
DS.11 can hold all the addresses necessary to support an entire LAN connected to a
SA-DS.11.
1.5 Where to Use DSSS
DSSS technology (Direct Sequence Spread Spectrum) spreads a signal power over
22MHz bandwidth; the same frequency is used for each transmission. This provides
the DS.11 with a fast bit rate and long range links, ideal for outdoor bridging.
By using a directional antennas, spatial separation, and cross polarized
discrimination DS.11 can feed FH (Frequency Hopping) distribution points with no
performance loss.
Backbone links
- Our DS.11 Bridge has low latency, which makes it ideal for
backbone links of the WLAN.
Data rates
- The DS.11 is ideal for clients that need high sustained data rates or
high burst rates.
Long links
- The DS.11 remote bridging capabilities enables it to support clients
up to 15 mile away.
Latency sensitivity
- Use the DS.11 for applications that are sensitive to latency.