Pagina 1
Manual Brel special bi-directional roller shutter motor
Type BRE45
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
warning:
Children cannot recognize the dangers of electrical equipment and may therefore not work with it.
It is important to follow this instruction for your own safety.
1.
Do not operate the motor in humid surroundings.
2.
The motor must be installed correctly.
3.
Keep the antenna in a good condition and do not shorten.
The antenna should not come into contact with other metal
parts otherwise it will reduce the effect.
4.
The motor must be protected from direct moisture influences.
5.
BREL-Motors declares that this motor has been manufactured according to the guidelines of the CE standard 1999/5/EC.
_______________________________________________________________________________
Wiring
_______________________________________________________________________________
Functions remote control
Changing batteries
DD-2702H
Works with all BREL transmitters:
Visit our website www.BREL-HOME.com
for more manuals and information
_________________________________________________________________________________
Technical data of the motor
BRE45-10 BRE45-20 BRE45-40
Voltage:
230V
230V
230V
Power:
112W
198W
198W
Torque:
10Nm
20Nm
40Nm
Maximum motor runtime:
4 min.
4 min.
4 min.
Speed:
15rpm
15rpm
15rpm
Amperage:
0.49A
0.69A
0.86A
Safety class::
H
H
H
Moisture and dust protection:
IP44
IP44
IP44
Temperature reach
:
Normal use:
-10
℃
tot +40
℃
Scan the QR code here for
the manual to download
and view instructional videos
BRE45-10
BRE45-20
BRE45-40
NOTE:
If the motor has
been running continuously
for 4 minutes, it may
become too hot and then
stop. After approximately
one hour half an hour, this
one will continue to run.
