Page 1
BREL motors is part of:
Manual Brel Radio Tubular motor
Type MLE
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty
can’t be claimed.
warning:
Children cannot recognize the dangers of electrical equipment and may therefore not work with it.
It is important to follow this instruction for your own safety.
1. Do not operate the motor in humid surroundings.
2. The motor must be installed correctly.
3. Keep the antenna in a good condition and do not shorten. The antenna should not come into contact
with other metal parts otherwise it will reduce the effect.
4. The motor must be protected from direct moisture influences.
_______________________________________________________________________________
Functions remote control
Works with all BREL transmitters:
__________________________________________________________________________________
Technical data of the motor
MLE15-0.3 MLE16-0.3
MLE25-1.1 MLE28-2 MLE35-3 MLE35-10
•
Motor voltage:
DC 8V
DC 8V
DC 8V
DC 12V DC 12V
DC 12V
•
Charge voltage:
DC 5V DC 5V
DC 5V
DC 5V
DC 12.6V DC 12.6V
•
Maximum ampere charger:
2 A
2 A
2 A
2 A
2 A
2 A
•
Power:
5 W
3.6 W
8 W
15 W
26 W
26 W
•
Torque:
0.3 Nm 0.3 Nm
1.1 Nm
2 Nm
3 Nm
10 Nm
•
Speed:
30 rpm 50 rpm
28 rpm 28 rpm 28 rpm
9 rpm
•
Amperage:
0.6 A 0.78 A 0.94 A
1.25 A 2.20 A
2.20 A
•
Moisture and dust:
IP44
IP44
IP44
IP44 IP44
IP44
•
Storage capacity is up to 20 channels:
•
Working temperature of the motor:
o
Heavy use:
-10
℃
tot +40
℃
o
Normal use: -20
℃
tot +70
℃
______________________________________________________________________________
Reach
L1 = 100 meter
L2 = 25 meter
