Page 3
______________________________________________________________________________
Step 2 Change direction
Variant A
If the direction is right, skip step 2 and proceed to step 3.
Press P1 until 1x
2x P2
1x
1x
Hold down the P1 button until the motor Press 2x on the P2 button.
Press the button down. Press the button up. The product will now go up.
moves 2x momentarily (and beeps).
Each time you press the
The motor moves.
Reading the first transmitter
button, it moves momentarily.
(At the end you will
has been completed. You
(and beeps).
hear 6 beeps).
can now proceed with
setting the end limits.
Variant B
Press P1 until 3x
Hold down the P1 button until the motor
The direction of rotation is changed.
moves 3x momentarily (and beeps).
_______________________________________________________________________________
Step 3 Setting the end limits
If no limit positions are set, the motor will only move in the pulse setting.
1x P2
1x
1x P2
1x
Press the P2
Press the button
Press the P2
It moves momentarily.
Set the product on the
button. The motor
up. The motor
button.
desired top position.
moves momentarily
moves momentarily
The motor
.
(and beeps).
(and beeps).
(beeps 4x).
STOP until
1x
STOP until
Hold the stop button until the motor
Set the product on the end position. Hold the stop button until the motor moves
moves momentarily (and beeps).
momentarily (and beeps). Limit setting is ok.
_______________________________________________________________________________
Step 4 Setting third limit position
If you press the stop button for more than 3 seconds, the motor will move from any position to the third limit position.
1x P2
2x STOP
Go to the desired
Press 1x the P2
Press stop
It moves momentarily.
third limit position
button.
button 2x.
for confirmation.
To remove the third limit position, you must go to the third position and repeat above action.
