G B
7
2 : 1 ( 5 6 0 $ 1 8 $ / 3 $ & ( 5
OPERATION AND PROGRAMS
1.
Insert the Safety key.
2.
Press the power button. The monitor will turn on.
The program window will
display ENTER WEIGHT. Press the SPEED +/- or
I/- buttons to input your weight.
3.
Press ENTER to confirm your setting value. The
program window will display SELECT PROGRAM
OR PRESS START.
4.
Press PROGRAM button to select the desired
program P1-P9 or U1-U3 with the SPEED +/- or
I/- buttons.
5.
In the program 1, the program window will display
”MANUAL SPEED & INCLINE”. In the program 2
to program 8, the program window will display profile
name. In the program 9, the program window will
display “HRC WEIGHT LOSS”. Press the ENTER
button to confirm your desired program.
6.
The program window will display “ENTER YOUR
WORKOUT TIME”. The TIME window will flash.
Press + / - button to set up your desired time to do the
exercise. Press the ENTER button to confirm your
setting value.
7.
The program window will display “ENTER YOUR
WORKOUT DISTANCE”. The DISTANCE window
will flash, press + / - button to set up your desired
distance to do the exercise. Press the ENTER button
to confirm your setting value.
8.
The program window will display “ENTER YOUR
WORKOUT CALORIES”. The CALORIES window
will flash, press + / - button to set up your desired
calories to do the exercise. Press the ENTER button to
confirm your setting value.
9.
In the Program 1 to Program 8, press START to
begin. Use the SPEED + / - keys to adjust the speed
and the I / - keys to adjust the elevation. In
preset programs, you can change the resistance level
in the section of the profile you are performing at the
moment.
10.
In the Program 9, the program window will first
display ”ENTER AGE”. Press + / - button input your
age and ENTER to confirm. The program window
will display “ENTER TARGET HEART RATE”,
press +/- button to input desired target heart rate, then
press ENTER to confirm the target heart rate. You can
now enter the target time, distance and calories. Press
the START to begin exercise. Heart rate controlled
exercises enable training at a selected heart rate level.
Heart rate controlled exercises always require heart
rate measurement.
USER 1 TO USER 3
1.
3UHVV(17(5WRFRQ¿UP\RXUGHVLUHGXVHUVHWWLQJ
program.
2.
The program window will display “ENTER YOUR
:25.2877,0(´7KH7,0(ZLQGRZZLOOÀDVK
Press + / - button to set up your to do the exercise.
3UHVV(17(5WRFRQ¿UP\RXUVHWWLQJYDOXH
3.
The program window will display “ENTER YOUR
WORKOUT DISTANCE”. The DISTANCE
ZLQGRZZLOOÀDVKSUHVVEXWWRQWRVHWXS\RXU
desired distance to do the exercise. Press ENTER
WRFRQ¿UP\RXUVHWWLQJYDOXH
4.
The program window will display “ ENTER YOUR
WORKOUT CALORIES”. The CALORIES
ZLQGRZZLOOÀDVKSUHVVEXWWRQWRVHWXS\RXU
desired calories to do the exercise. Press ENTER
WRFRQ¿UP\RXUVHWWLQJYDOXH<RXFDQQRZHGLWWKH
SUR¿OHOHYHOV
a.
,QWKHSURJUDPZLQGRZWKH¿UVWFROXPQRI
/('PDWUL[ZLOOÀDVK3UHVV63(('WRVHW
up desired speed value and press i / - to
set up desired incline level.
b.
3UHVVWKHHQWHUEXWWRQWRFRQ¿UP\RXUSUR¿OH
VHWWLQJIRU¿UVWFROXPQ
c.
&RQWLQXHWR¿QLVKDOORIWKHSUR¿OHVHWWLQJ
column by column.
5.
Press START to begin exercise.
SERVICE MENU
1.
During the power ON position (initial mode), first
hold the PROGRAM button then press the ENTER
button together to enter the Service Menu.
2.
Incline window shows model number. Distance
window shows software version, KCAL window
shows year. Time window shows date. Speed window
shows diameter of roller.
3.
Press ENTER button window shows LDU version
and ISP version
4.
Press ENTER button enter KM/MILE switch mode,
Press SPEED + - or I - to select KM or
MILE.
5.
Press ENTER button window shows total distance.
6.
Press ENTER button window shows total hour.
7.
Press ENTER button goes back to ON position
– initial mode.
MAINTENANCE
The equipment is safe to use only when periodically
maintained and inspected for faults and wear.
CAUTION!
Do not attempt any servicing or adjustment
other than those described in this manual. Any other
servicing must be performed by an authorized service
representative. Check the tightness of all fixing
screws once a year. Do not overtighten.
CLEANING AND LUBRICATING THE TREADMILL
FAILURE TO LUBRICATE YOUR TREADMILL MAY
INVALIDATE THE PRODUCT’S WARRANTY!
Wipe the treadmill surfaces, especially the handlebars
and console from dust with a damp cloth or towel.
Do not use solvents. Use a small vacuum nozzle to
carefully vacuum around all visible components (belt,
running deck, side rails etc.). Also keep the area near
the treadmill clean. While in use, the treadmill gathers
dust that may cause problems in the operation of the
equipment.
In average domestic use (a maximum of 60 minutes a
day), you should check the lubrication once a month
– however, lubricate the belt only if needed. In more
demanding use, the lubrication needs be checked at
shorter intervals. This is best done before you begin a
training session. Check the lubrication as follows:
1.
Ensure the treadmill is powered off! Step on the
Bremshey_Pacer09_4_spareparts.indd 7
22.5.2008 12:07:46
