5
D
Operating Instructions
Tripod LED Light
JARO 6000 T
Note: Before use of the floodlight, please carefully read the operating instructions and store them
at a proper location!
TECHNICAL DATA
IP class:
IP 65
Protection class:
I
Nominal voltage:
220-240 V~ 50/60 Hz
Electrical Power:
2 x 30 W
Connection line:
H07RN-F 3G1.0
Power factor:
> 0.9
Current max.:
2 x 0.17 A
Weight:
6.05 kg
Dimensions:
1303 x 62 x 1645 mm
Protective cover dimensions: 202.8 x 160.8 x 4 mm
max. projected area: 2 x 0.594 m²
These LED floodlights are suitable for indoor and outdoor lighting purposes.
OPERATION
In this connection, you must imperatively ensure sufficient stability of the tripod and firm
assembly of the floodlight.
Tripod for double floodlight 2 x 30 W: extendible from 88 cm to 138 cm
ASSEMBLY OF THE LED FLOODLIGHT ON THE TRIPOD
Loosen the locking screw (C). Fold out the feet completely.
Afterwards, re-tighten the locking screw (C).
There are two arrows (1) at the tube. These mark the area where the ring of the feet (2) have to be
placed to ensure sufficient stability of the tripod. The refore make sure that the ring of the feet (2)
matches insides the arrows (1) area.
Fasten the LED floodlight by means of the locking screw (A) at the central hole of the fastening
bracket on the tripod.
2
1
19P117 Jaro 6000T 0532141 191212.indd 5
12.12.2019 13:46:37
