brennenstuhl PMA DE V2, Operation And Safety Notes

13

GB

Operation / Cleaning  and  maintenance 

q   

Switch the Power Manager 

on / off 

i

Set the master ON / OFF switch 

1

 to position 

I

 to switch the Power Manager on. 

i

Set the master ON / OFF switch 

1

 to position 

0

 to switch the Power Manager off.

Note:

 If the Power Manager is switched off,  

all connected appliances are also switched off 
automatically.

q   

Switch electric appliances 

on / off

i

Make sure that the Power Manager is switched 
on (see “Switch the Power Manager on / off “). 

i

Set the respective ON / OFF switch 

3

 to position 

I

 to switch the connected appliance on. The  

respective  ON / OFF  switch 

3

 lights up if the 

connected appliance is on. 

Note:

 Socket and respective ON / OFF switch 

3

 are arranged in the same order.

i

Set the respective ON / OFF switch 

3

 to posi-

tion 

0

 to switch the connected appliance off.

q   

Use of the USB hub 

(only for PMA USB DE V2)

i

First connect the type-B USB jack (square) of 
the USB line (included) with the connection 
socket 

6

.

i

Connect the other end of the USB line with the 
USB port of your computer.

i

Now connect the type-A USB jack (flat) of the 
respective appliance with one of the 4 USB 
ports 

4

. Now you can use the Power Manager 

as USB hub for your computer. 

q   

Power adaptor for USB hub 

(only for PMA USB DE V2)

It is possible to externally supply the USB hub with 
electricity using a power adaptor (not included). 
This may be necessary for the use of specific USB 
devices.

i

Plug the connection of the power adaptor 
(5 V / 2.5 A  DC  

) (not included) into 

the power adaptor socket 

5

.

i

Plug the power plug of the adaptor into a 
properly installed outlet.

i

Disconnect the adaptor from the adaptor socket 

5

 when the adaptor is not connected to the 

mains. 

q 

Surge protection

The Power Manager has an integrated surge pro-
tection (19.500 A), which protects the connected 
electric appliances from voltage peaks (e.g. indirect 
lightning).

-   The surge protection is active when the LED 

2

is on. 

-   The surge protection has been destroyed, if the 

LED 

2

 remains dark when the Power Manager 

is switched on. The power supply to the sockets 

7

 is cut. 

q 

User information

-   You can use the body of the Power Manager 

as support for various appliances (e.g. notebook, 
TFT display etc.) (see figure C).

Q

Cleaning and maintenance

ELECTROCUTION HAZARD! 

Keep the device away from rain and moisture.

Ingress 

of moisture increases the risk of electric shock.

PowerManager_Content_EU.indd   13

18.03.14   15:48