3-22
Maintenance
D6
D. Lubrication (Figs. D1 - D6)
Lubricate with quality grease before starting work and every 8 operating hours.
Clean and grease PTO drive shaft before each prolonged period of non-use.
Molded nipples on the shield near each shield bearing are intended as grease
fi ttings and should be lubricated every 8 hours of operation!
Telescoping members must have lubrication to operate successfully regardless
of whether a grease fi tting is provided for that purpose! Telescoping members
without fi ttings should be pulled apart and grease should be added manually.
Check and grease the guard tubes in winter to prevent freezing.
D1
D4
D2
D3
F. Length adjustment (note: maximum operating
length LB). (Figs. F1 - F4)
1. To adjust length, hold the half-shafts next to each
other in the shortest working position and mark
them.
2. Shorten inner and outer guard tubes equally.
3. Shorten inner and outer sliding profi les by the
same length as the guard tubes.
4. Round off all sharp edges and remove burrs.
Grease sliding profi les.
D5
Check the length of the telescoping mem-
bers to insure the driveline will not bottom out or
separate when turning and/or going over rough ter-
rain.
F1
F2
F4
F3
D
250968D
250968F
PTO SHAFT AND CLUTCH
REVISED 061107-12
Summary of Contents for Corner Auger 1080
