Bresser 9633110, Instruction Manual

21 / 28

• Press the UP or DOWN button and then ENTER to confirm the selection.

Cam ID

 (Shown as icon [b], see the picture above)

• If several cameras are in use, number each camera (up to 99). Press the UP or DOWN button and

press ENTER to confirm the selection between Id:01 and id:099.

PIR

• Select Lo or HI for PIR sensitivity.

• Press the UP or DOWN button, and then ENTER to confirm the selection.

DLY

• “Delay” option allows you to determine how many seconds between each trigger.

• Press the UP or DOWN button, and then ENTER to confirm the selection between 1, 5 and 10

minutes.

Battery Icon

 (Shown as icon [d], see the picture above)

• The battery icon has 4 levels to display the power status. Press ENTER to move to the next set-

ting.

Micro SD card Icon

 (Shown as icon [e], see the picture above)

• It indicates the status of the Micro SD card. If no Micro SD card is inserted, it displays "n0" and

continues to flash.

• If a Micro SD card is inserted, it shows “F:n”, and you can use the UP or DOWN button to choose

from F:n (don’t format SD) or F:y (format SD).

• Press ENTER to end the setting mode, or format the Micro SD card and then finish the set up.

14 Downloading files

1. Eject the Micro SD card from the camera and insert it into a card reader that is connected to a

computer.

2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that repres-

ents the Micro SD card.

3. Copy images or videos from the card to your computer.

15 Technical data

Image sensor

5 MP

Photo resolution

5 MP / 20 MP (interpolated)

Photo format

JPEG

Video resolution

1920 x 1080 @ 10 sec (25 fps)

Video format

AVI

Lens

f=5.0mm ; F/NO=2.0; FOV=57.5 degrees; Auto IR
filter

Display

Yes (8888 B/W + icons)

External memory

Micro SD card up to 32GB (Micro SD card in-
cluded)

Range of IR flash

15 m

Triggering distance

15 m (Below 25° C at the Normal Level)

Detection angle of sensors

60°