2. Display Zone
Power
Brightness
Colour Temperature
Press the
buttons to adjust the Colour Temperature Range:
2500-9000K.
Press the
buttons to adjust the brightness Range: 0-100%.
RGB colour hue
Power
Brightness
S
34
Press the
buttons to adjust the HUE RGB Range: 0-360°.
Press the
buttons to adjust the brightness Range: 0-100%.
Current Effect
Power
Brightness
Effect Mode
Press the
buttons to shift effects (20 effects).
Press the
buttons to adjust the brightness Range: 0-100%.
3. Effect Modes
Number
Scenario
Number
Scenario
1
CopCar
11
Strobe
2
Ambulance
12
RGB Strobe
3
FireAlarm
13
Paparazzi
4
Lightning
14
Emergency
5
Fireworks
15
H/L Beam
6
TV
16
Red Flash
7
Candle
17
Green Flash
8
Party
18
Blue Flash
9
Fault Bulb
19
HSI Slow
10
Pulsing
20
HSI Fast
PRODUCT SPECIFICATION
Model
BR-6RGB
Beads
White 69PCS
Yellow 69PCS
RGB 46PCS
CRI
95+
Voltage
3.7V
Battery Capacity
3000mAh
Illuminance
800LUX/0.3m
Color Temperature
2500-9000K
Work Time
Strongest Brightness > 2h
Weakest Brightness > 15h
Power
7W
Charge Port
Type-C
Beam Angle
120°
Charging Time
2,5h
Note:
The data of the light is on the base of average.
Slight difference shall exist among different lights.
DISPOSAL
Dispose of the packaging materials by type. Contact
your local waste-disposal service or environmental
authority for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage!
According to the European Directive 2002/96/EU on
Waste Electrical and Electronic Equipment and its trans-
position into national law, used electrical equipment must
be collected separately and recycled in an environmentally
sound manner.
Observe the current legal regulations when disposing of the
device! Information on proper disposal can be obtained from
municipal waste disposal service providers or the Environ-
mental Agency.
CLEANING
Before cleaning the device, disconnect it from the power
supply (remove plug or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To
avoid damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. Store it in the
supplied bag or transportation packaging. The batteries
should be removed from the unit if it has not been used for
a long time.
EC DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the
applicable directives and corresponding standards has
been prepared by Bresser GmbH. This can be viewed at any
time upon request at
www.bresser.de/download/F004613/CE/F004613_CE.pdf
UKCA DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the
applicable directives and corresponding standards has
been prepared by Bresser GmbH. This can be viewed at
any time upon request at
www.bresser.de/download/F004613/UKCA/F004613_UKCA.pdf
WARRANTY
The regular warranty period is 2 years and begins on the day
of purchase. You can consult the full warranty terms as well
as information on extending the warranty period and details
of our services at www.bresser.de/warranty_terms.
www.bresser.de/warranty_terms
HSI Fast
Summary of Contents for BR-7RGB MINI TUBE
Page 3: ...Fig 1 Packing List ...
Page 11: ......
