12 / 36
8. Press ALARM button during the alarm time display to disable the alarm. The symbol will not be
displayed.
13 Snooze function
1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will
sound again in 5 minutes.
2. Press ALARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
14 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
15 Manual measurement display
1. Press -/MEM button several times to display the saved values one after another.
2. Display order: Temperature maximum value (outdoor) > Temperature minimum value (outdoor) >
Humidity maximum value (outdoor) > Humidity minimum value (outdoor) > Temperature maximum
value (indoor) > Temperature minimum value (indoor) > Humidity maximum value (indoor) > Hu-
midity minimum value (indoor)
3. Press and hold -/MEM button for approx. 3 seconds to delete the value currently displayed.
16 HI/LO Alert
HI/LO alert
are used to alert you of certain weather conditions. Once activated, an alarm sound is
trigger and the alert icon flashes as soon as a set value is reached.Supported areas and alarm types:
Area
Type of alert available
Indoor temperature
HI AL / LO AL
Outdoor temperature
HI AL / LO AL
Indoor humidity
HI AL / LO AL
Outdoor humidity
HI AL / LO AL
HI AL = High alert / LO AL = Low alert
HI/LO alert setting
1. Press the ALERT button for approx. 2 seconds and the current channel symbol starts flashing.
2. Press the +/CH- or -/MEM button to select IN (indoor) or CHANNEL 1-8.
3. Press ALERT button to confirm and continue to the next setting.
4. Settings order: Channel > HI temperature > LO temperature > HI humidity > LO humidity
5. Press the +/CH or -/MEM button to modify the value by 0.1 °C/°F for temperature or 1% for humid-
ity. Press and hold to quick adjust the value.
6. Press the ALARM button to activate or deactivate the Alarm for the currently selected HI/LO Alert.
7. Then finished, press the ALERT button for approx. 2 seconds to return to normal mode.
Silence the alarm
8. When alert is triggered, press the ALARM/SNOOZE, ALARM or ALERT button to stop the alert.