37
EN
Viewing the sea-level pressure history
1. In all modes, pressing
HISTORY
will toggle the sea-level pressure display.
2. When sea-level pressure is displayed, press
HISTORY
repeatedly to view sea-level pressure data
for each of the last 24 hours.
3. If no buttons are pressed for 5 seconds, the display automatically returns to pressure and weather
forecast mode.
Viewing the pressure/temperature/humidity bar charts
The bar chart on the display can be confi gured to display the history data for sea-level pressure,
temperature or humidity for channel 1. In pressure and weather forecast mode, press and hold
ALARM/CHART
to toggle the bar chart between...
• Sea-level pressure (‘PRESSURE’ should be displayed)
• Temperature (Thermometer icon and ‘CH1’ should be displayed)
• Humidity (RH icon and ‘CH1’ should be displayed)
Viewing moon phase history and forecast
Full moon
Æ
decreasing
moon
Æ
waxing moon
1. In pressure and weather forecast mode, press
MEMORY
.
2. ‘+ 0 days’ should be fl ashing.
3. View moon phase history/forecast:
Press
[
▲
]
or
[
▼
]
to choose number of days forward (+ days) or backward (- days) from current
date. Press and hold either button for fast advance. The corresponding moon phase will be shown.
4. To exit, press
MEMORY
.
Otherwise, if no buttons are pressed for 5s the display automatically returns to pressure and
weather forecast mode.
Time and alarm mode
The base station can be confi gured to display the time, calendar or UTC time. There are three time
alarms available on the console unit:
Single alarm:
activated once at specifi ed time
Weekday alarm:
activated everyday from Monday to Friday at specifi ed time
Pre-alarm:
activated at specifi ed time interval (30 min) ahead of weekday alarm, if channel 1 tem-
perature falls to +2 ºC or below.
The snooze duration for the above alarms can also be programmed (0-15 min).
Accessing clock and alarm mode
From the base station: Press
[
▲
]
or
[
▼
]
until the clock icon [
] beside the time/date display starts
fl ashing.
