9
When choosing OFF the data will be stored indefinitely until a battery
change is required.
Temperature and humidity
1. Once the batteries are installed the main unit will start displaying the interior
measurement information. The main unit will display the information from
the outdoor sensor for the first time approximately 3-4 minutes after the
power supply was established.
2. Press CF/SET touch control (12b) to switch screen display between °C
or °F. Screen display will change for outdoor temperature as well as for
indoor temperature.
Indoor humidity indicator
The indoor humidity indicator (6) displays the following conditions:
COMFORT
DRY
WET
WET
Indoor humidity between 66% and 95%
COMFORT
DRY
WET
COMFORT Indoor humidity between 45% and 65%
COMFORT
DRY
WET
DRY
Indoor humidity between 20% and 44%
NOTE!
Read chapter "Ventilation indicator" for more information.
Temperature and humidity MAX/MIN records
1. Press the touch control MEM/ (12a) several times to switch between the
values for current, minimum (MIN) and maximum (MAX) temperature and
humidity. The display will change for the indoor temperature as well as for
the outdoor temperature.
2. The MIN/MAX temperature and humidity values will be recorded
automatically.
NOTE!
Depending on the selected type for measurement data storage the MIN/
MAX values will be saved for 24 hours or until batteries need to be changed
(Read chapter "Manual time setting and other settings").
3. Press MEM/ touch control for approx. 3 seconds to delete MIN/MAX
values manually.
Atmospheric change
The device uses the measurement data to calculate the absolute humidity.
The icons indicate how the ventilation would affect the indoor climate:
Manual_7007402_Thermo-Hygrometer-VentAir_en-de_BRESSER_v012021a.indb 9
04.01.2021 16:38:53
