031-11214
Rev. 1 05/2022
5 of 9
Using Your Product
CUBE Micro Station®
Wiring your CUBE Micro Station® Cont…
5. One-by-one, plug each AC adapter into one of the AC outlets.
6. Route each power cable through the front, corresponding holes on the
lower portion of the unit.
7. Replace the module tray, making sure to wrap it over the front, back
and side edges. Look for imprinted “R” on the tray. “R” goes in first,
towards the back.
8. Replace the device modules in the unit. Left to right: slots 5, 6, 5
9. Insert devices into the slot dividers, connecting each into a
corresponding AC power adapter. Note: Middle divider between device
modules is not intended for storage.
10. Connect the main CUBE Micro Station power cord into the wall
11. Toggle the power switch to ON (“RESET”)
