031-11214
Rev. 1 05/2022
6 of 9
Using Your Product
CUBE Micro Station®
Placing your CUBE Micro Station®
Your CUBE Micro Station® can be placed on a cabinet, stacked, daisy-
chained (TVS10 only) or wall mounted. Stacking and wall mounting kits are
available upon request.
Stacking
1. Carefully place two CUBE Micro Station®’s on top of each other to avoid
scratching or denting either station.
2. Locate the stacking brace plate and attach to the back of the units with
the four (4) Torx T-25 screws
Daisy-Chaining (TVS10 only)
Daisy-chaining allows for two CUBE Micro Station® 10 unit to be run off one
outlet. Daisy-chaining feature is not applicable to wall mounted units. The
remaining courtesy outlet can power an additional auxiliary device not to
exceed 100W.
