3
Begin by plugging one end of the power cord into the
Base and the other end into an available power outlet.
Turn the power switch to the ON position (I). The switch
should light up.
Unfold the Track and connect it to the Base using the
magnetic 6-pin connector. If you are connecting Extension
Tracks (distinguishable by their shorter, 1 foot cords),
those can now be daisy-chained to the main Track.
Connect a charging Pod to the desired location on the
Track using the attached magnetic 3-pin connector.
The connector will light up to indicate when a successful
connection has been made with the track.
Peel the protective film from the bottom of the Pod to
expose the micro-suction tape. Secure the charging Pod
to the desk or work surface by pressing down gently from
the top with the palm of your hand to engage the micro-
suction.
Repeat steps 4-5 for each charging Pod.
To begin charging, simply plug a compatible device
into the Pod using the installed device cables.
1
2
3
4
5
6
7
Setting
Up