Determine the exact floor location, the orientation of the oval cutout and the center of
the Support which the power pole will mount onto. Position Support and mark floor.
Use a plumb line to locate the center and the direction of oval cutout on the ceiling
required to allow the power pole to pass through the ceiling. Mark center and high
points of oval cutout on the ceiling.
Position the oval escutcheon ring using the marks on the ceiling and assuring the oval is
orientated correctly to match the oval in the Support. Trace the inside oval and mark mount-
ing hole locations. Cut oval shape along line with cutting blade positioned outside the line.
Drill 4 holes for recommended 1/4” dia. expansion bolts. Bolts pass thru or fasten
into(drywall).
STEP 3
STEP 4
Fig. 3
STEP 5
Top Cover
Power Pole
Escutcheon Ring
Slide oval Escutcheon Ring and Top Cover over power pole (Fig. 3).
Support
end.
