Bretford TPMA Assembly Instructions Download

Page: 2 / 4

STEP ONE

Place Top Adjustment Assembly on a flat surface with flanges facing up.

Fig. 2

3). Optional Installation Using Threaded Rods

1. Follow instructions above for attaching to pipe.

2. Determine length of four 1/4" threaded rods required.

3. Install threaded rods using 1/4" nuts at top and bottom each of steel plate.

Tighten securely.

Fig. 1

2). Optional Installation Using Threaded Pipe

1. Remove Top Tilt Support and Mounting Adaptor from Top Adjustment Assembly.

They have been loosely attached for shipping purposes only.

2. Slide Top Tilt Support over Mounting Adaptor (Fig. 1)

Secure Mounting Adaptor by tightening (2) 1/4-20 screws (AA) to a snug fit.

3. Screw adaptor to threaded Bretford accessory securely.

4. Insert 1/4-20 set screw (FF), do not tighten screw (Fig. 2).

Top Tilt Support

010-3085

010-3084

010-3083

Summary of Contents for TPMA

Page 1: ...y TPMA LCD Projector Mount Assembly Instructions HARDWARE LIST Ref Qty Part Description AA 6 030 0304 1 4 20X5 8 Combo Slotted Truss Screw BB 4 030 0256 1 4 20 Flange Nut CC 1 HK1020 Allen Wrench DD 2...

Page 2: ...plate Tighten securely Fig 1 2 Optional Installation Using Threaded Pipe 1 Remove Top Tilt Support and Mounting Adaptor from TopAdjustmentAssembly They have been loosely attached for shipping purpose...

Page 3: ...d parts Slide Side Wrap Adjustment Assembly onto Main Adjustable Plate Assembly Fig 2 and align with one set of mounting holes Choose position of Wrap Adjustment Assembly according to size and configu...

Page 4: ...Readjust if necessary When secure turn completed mount right side up Fig 2 Fig 1 Fig 2 Ceiling Mount Pipe Mount STEP SIX Insert 1 4 20 screws AA with plastic washers DD into threaded Center Tilt Supp...